Phase 03: ESP32-C5 serial link hardening + bench diagnostics

Browse Source

Enumeration:
- Merge the library's stock probe table instead of replacing it, so adding
  Espressif 0x303A/0x1001 doesn't drop every other supported device
- Select the ESP32-C5 by VID/PID rather than list position
- Log USB interface descriptors to distinguish CDC data from the JTAG interface
Lifecycle:
- Don't close the shared port in MqttViewModel.onCleared() - the foreground
  recording service outlives the ViewModel and would beacon into a dead port
- Handle ACTION_USB_DEVICE_DETACHED so the UI stops reporting a stale link
- Implement the STATUS heartbeat on both sides (1 Hz) plus a phone-side watchdog
- Surface write failures and firmware drop counters on the CAM Pinger card
Protocol:
- Assert DTR/RTS on open (unverified on hardware - see FLASHING.md step 5)
- Raise SERIAL_LINK_MAX_PAYLOAD 160 -> 512 on both sides; real third-party CAMs
  exceed 160 and were being silently dropped at the resync branch
- Move the enlarged buffers off task stacks; serialize send_frame with a mutex
Firmware and app must be updated together - a 512/160 mismatch fails silently.

...

This commit is contained in:

Ashin Walpola

2026-08-10 11:38:01 +02:00

parent 33c4ec5998

commit 64fb78590e

20 changed files with 3076 additions and 596 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download Patch File Download Diff File Expand all files Collapse all files

obu-firmware/sdkconfig

+2104 -424

File diff suppressed because it is too large Load Diff