Commit Graph
3 Commits
Author SHA1 Message Date
Ashin Walpola a08494b56a Drive the ESP32-C5 station over USB or BLE, send CAM or VAM, signed or not
The app now speaks the station-link protocol of the new obu-firmware.
Esp32Link picks the transport from Settings (UsbSerialTransport or the new
BleLinkTransport), tells the previous firmware from the new one by its
heartbeat, and runs the session: STATION_CONFIGURE with the current pseudonym
MAC (which also starts the board's radio), CREDENTIALS_PROVISION of the
bundled demo chain when the board has no ticket, then per message a
POTI_UPDATE and a BTP_DATA_REQUEST. Received messages still arrive as
V2X_RX frames, so the receive side is unchanged. A board on the previous
firmware keeps working for CAM over USB.

Settings > Connection > ESP32-C5: link USB-C or Bluetooth, transmit CAM or
VAM, "Sign outgoing messages" (on by default). The connection card, top bar
and dashboard show the link in use, the pairing passkey and signing counters.

- VAM: VamUperCodec (TS 103 300-3 V2.3.1, bytes checked against asn1tools)
  and VamGenerationRules (clause 6.4, Tables 16/17).
- BLE: the firmware's GATT layout (service 0000C175-...), MTU 517, pairing
  and encryption settled before any other operation (short timeouts during
  pairing made it loop), backoff between attempts, reasons on the card.
- Clock: a PoTi goes to the board once per new fix and never moves the
  board's clock backwards except for a real correction (>= 60 s); stale and
  wobbling fix times made the board answer time_regression and restart its
  stack every few seconds. GnssTimeSource keeps the last measured phone-clock
  error while GNSS time drops out indoors: the bench phone is 14 minutes fast,
  and falling back to it made every transmitted timestamp jump by that much.
- assets/demo-chain.vcr: throwaway, not EU-registered demo chain generated
  2026-09-23 (AT B80B49387A4C12EB, psid 36 and 638). Its private key ships
  with the app on purpose; receivers verifying against the EU trust list
  drop what it signs.
- Bluetooth permissions requested at start-up on Android 12+.

StationLinkTest pins the codec to bytes from the colleague's Python
implementation (microbu_link/messages.py). 103 unit tests pass.
2026-09-23 17:28:05 +02:00
Ashin Walpola 7b8a8cbb32 feat: CAM-based use case detection engine, decouple DENM from sensor triggers
Added:
- UseCaseDetectionEngine: IMA-B, IMA-S, RTW-B, LTW-B, SMVA/BCW-B via per-station
  CAM history, yaw-rate/heading-trend turn detection, Info/Awareness/Warning alerts
- Ego state from obu_gnss (~4Hz, yaw rate) with phone GPS fallback when stale
- Human-readable alert narratives + technical detail in V2X Monitor
- Settings > Use Case Alerts per-use-case toggles

Fixed:
- DENM no longer auto-fires on braking/stopping; manual-only (antenna/RSU test)
- Removed unwired CamBuilder.kt (dead code, contradicted CAM-only architecture)
- TripRecordingService no longer depends on MQTT/OBU connectivity
2026-07-02 15:04:34 +02:00
Ashin Walpola ae17d4fcba Initial Commit 2026-06-03 14:51:31 +02:00