obu-firmware builds against vanetza-idf from microbu-esp32c5/external, but that tree was gitignored, so a clone of this repository could not build the firmware it ships. It is now committed here as ordinary files in its own folder, microbu-esp32c5/: the colleague's commit cf4b99f plus the V2X2MAP bridge's signature verification (--trust) used on the bench. Nothing is fetched from or pushed to the colleague's repository; this repository and its remotes carry everything. The folder's own .gitignore keeps build output, downloaded components and private key material out, as it did there; the committed file set is identical to that repository's tracked files. The ESP32-C5 is still flashed from obu-firmware/, which only takes vanetza-idf from microbu-esp32c5/, so the two stay separate folders. FLASHING.md says how to take a newer version of the colleague's tree (copy it over the folder, rebuild, test, commit).
19 lines
1.0 KiB
JSON
19 lines
1.0 KiB
JSON
{
|
|
"kind": "component-tests",
|
|
"target": "esp32c5",
|
|
"idf_version": "6.0.2",
|
|
"port": "COM11",
|
|
"status": "pass",
|
|
"reset": "none",
|
|
"checks": 668,
|
|
"backend": "BackendMbedTls (PSA Crypto, mbedTLS 4.1.0 of ESP-IDF 6.0.2) with CONFIG_MBEDTLS_HARDWARE_ECDSA_VERIFY; 668 checks = 794 host checks minus the OpenSSL-only oracle tests",
|
|
"capture": "listen-only after the esptool post-flash reset",
|
|
"verifies": "receive-side verification (test_verification) on the device; verification cost line: digest-signed message 34.6 ms end to end, raw ECDSA P-256 verify 29.7 ms on the ECDSA peripheral (control build without the peripheral: 57.6 ms raw, 62 ms end to end, not retained)",
|
|
"sha256": {
|
|
"application": "2a14764ceb3062010f9d466b80a1a2dbd178611d52adf8dc479d5933d82e32a4",
|
|
"bootloader": "93903cefa2bae3f5805a604ae744fabfdea78a866a1230ec3cc129190b93fe40",
|
|
"partition_table": "73c0b5c3e5fcba3a151cc70c453c93dd5f4798899e7f2f8cca76da1f32ffc501",
|
|
"sdkconfig": "e793777a0f878c17d97d1a34de6c9a136b9239b52cb23d17874790951b4bd752"
|
|
}
|
|
}
|