Files
MicrOBU/obu-firmware/external/vanetza-idf/docs/idf/evidence/security-device-02/result.json
T
Ashin Walpola d107534eb2 Keep vanetza-idf in obu-firmware, so a plain clone builds the firmware
obu-firmware builds against the vanetza-idf C-ITS library, which until now
came from the colleague's microbu-esp32c5 tree beside the repository and was
not tracked here, so a clone of this repository could not build the firmware
it ships. The library alone is now part of obu-firmware, as
obu-firmware/external/vanetza-idf: their external/vanetza-idf at commit
cf4b99f, unchanged (9775 files; see its PROVENANCE.md). CMake takes it from
there by default; -DVANETZA_IDF_DIR still points the build elsewhere.

The rest of the colleague's tree (their own VAM firmware, PKI tooling,
station-link Python tools, the V2X2MAP bridge) stays out of this repository
and gitignored; nothing is pushed to their repository. NOTES.md, docs/06,
TODO.md and the pcap verifier's usage line point at the new location.
2026-09-24 10:56:05 +02:00

19 lines
1.6 KiB
JSON

{
"kind": "component-tests",
"target": "esp32c5",
"idf_version": "6.0.2",
"port": "COM20",
"status": "fail",
"checks": null,
"console_result_line": "VIDF_TEST_RESULT=1",
"failure": "FAIL: OER decoding failed - a std::runtime_error from vanetza/asn1/asn1c_wrapper.cpp copy() (encode/decode copy of an asn1c structure), raised on the device only; the same test binary passes on the host (626 checks, OpenSSL) and with the PSA backend on the host (803 checks). The build under test was the first with CONFIG_VANETZA_IDF_PKI=y; the failing section is unknown because the test runner did not yet print section markers (added afterwards as '-- <section>' lines) and the listen-only capture attached after the boot banner.",
"capture": "partial: attached in listen-only mode after esptool's post-flash reset; only the final lines were seen.",
"not_done": "re-run after a physical power cycle of the board (both boards, COM11 and COM20, hang in the ROM UART0 clock wait documented in docs/idf/validation.md after a DTR/RTS toggle): idf.py -B build-c5 -p COM20 flash, then immediately python ports/esp_idf/tools/device_checks.py --port COM20 --timeout 240 --no-reset --out docs/idf/evidence/security-device-03",
"sha256": {
"application": "05ea5985907c700e76be8c980c827ff1ce38d638ff22641254c06b366b6fd88c",
"bootloader": "93903cefa2bae3f5805a604ae744fabfdea78a866a1230ec3cc129190b93fe40",
"partition_table": "73c0b5c3e5fcba3a151cc70c453c93dd5f4798899e7f2f8cca76da1f32ffc501",
"sdkconfig": "caa03c6c8556d56b8ac848bc142ce68331b4a9cae3081590d4c7111338bc60a6"
}
}